Worthington X-Series 119 by XS Scuba

The Worthington X-Series 119 is a great tank for doubles.

With this great volume to weight distribution the 119's are a great choice for doubles.

Tank Specs

• Service Pressure 3442 psi
• True Capacity 123.0 cu ft
• Buoyancy* Full - 10.9 lbs.
• Buoyancy* Empty - 2.0 lbs.
• Weight Empty 42.0 lbs.
• Outside Diameter 8.00 in.
• Cylinder Length 24.0 in.
• Valve Included (DIN/Yoke)

*in sea water with valve

Manufacturing Process

• Built from Chromium Molybdenum steel plate
• Utilizes the deep draw process; the preferred method to build a steel scuba cylinder
• This process yields a cylinder with a very uniform wall thickness resulting in a lighter, more efficient cylinder

Buoyancy

• Superior buoyancy characteristics (Specs)
• These cylinders have been designed to be slightly negative at the end of a dive

Exterior Finish

• Hot dip galvanized - the absolute best finish for a steel scuba cylinder

Nitrox Ready

• Cleaned and sealed at the factory
• Free of hydrocarbons to a level of 40 mg per square meter

Boots

• Included with all XS Scuba steel cylinders
• Quality, self-draining design

Valves

• All XS Scuba steel cylinders include an International DIN Yoke valve
• Allows upgrade to Modular valves and manifolds
• Convertible design allows for standard yoke or 230 bar DIN connections
• Standard inlet thread (3/4"-14 NPSM) on cylinder allows upgrade to any other Thermo valve
• These valves are clean for Nitrox up to 40% FO2

Steel Specs (Imperial)